For work that happens every day, buy the Honda-engined Simpson PowerShot PS3228 — 3,300 PSI at 2.5 GPM. The pressure is almost beside the point. What separates a commercial machine from a homeowner one is the engine, the pump, and whether parts are on a shelf within an hour of you. The Honda GX200 is the engine commercial crews actually run, and that is the whole reason it costs what it costs.
A note on scope first: these are heavy-duty consumer and prosumer gas machines bought through Amazon. They are not hot-water, trailer-mounted or belt-drive rigs. If you are building a business around daily eight-hour runs, the right purchase is a belt-drive unit from a dealer who will service it — this page is for someone whose work is real but intermittent.
The four, as the listings state them
| | PSI | GPM | Engine | Best at |
|---|
| Simpson PowerShot PS3228 | 3,300 | 2.5 | Honda GX200 | Daily work, buy-it-once |
| Simpson PowerShot 3500 | 3,500 | 2.5 | Honda GX200 | Paint stripping and equipment |
| Simpson Clean Machine 3400 | 3,400 | 2.5 | CRX | Most capability per dollar |
| Champion 2800 Low Profile | 2,800 | 2.1 | Champion | Transport and storage |
What actually makes a machine commercial
The engine, first. A Honda GX200 is the reason two machines with identical pressure figures can differ by hundreds of dollars. Crews choose it because it starts on a cold morning in its fifth year and because every small-engine shop in the country stocks parts for it. A CRX or a generic engine will do the same work for a season or two; the difference shows up in year four.
Flow, not pressure. Every machine here publishes 2.1 to 2.5 GPM. That is the figure that decides how fast you finish, because flow carries the dirt away. 2.5 GPM runs any surface cleaner on this site at full speed. Buying 3,500 PSI at 2.0 GPM over 3,000 PSI at 2.5 GPM is a mistake people make constantly — the reasoning is in PSI vs GPM.
Whether you can service the pump. Homeowner machines have sealed pumps: when the pump dies the machine is scrap. Machines at this level have a drain plug and a specified oil, which means an oil change instead of a replacement. Budget the correct pump oil on day one, because engine oil in a pump crankcase foams and stops lubricating.
Whether you can move it alone. This is the specification nobody reads until they are lifting a machine into a truck bed. Pneumatic tires, a frame you can grab, and a weight one person can manage are worth more than 300 extra PSI.
Simpson PowerShot PS3228 — the pick
3,300 PSI at 2.5 GPM on the Honda GX200, with a steel frame and pneumatic tires that survive being dragged across a parking lot. It is contractor-grade, it is far more machine than a first-time homeowner needs, and for someone whose weekends involve other people’s driveways it is the one that will still be running when the cheaper units have been replaced twice.
3,300 PSI will also destroy vinyl siding, wood and car paint if you point it wrong. On a machine this size the nozzle choice stops being a detail and becomes the job — see nozzle colors.
Simpson PowerShot 3500 — the top of the range
3,500 PSI at 2.5 GPM on the same Honda GX200. Two hundred extra PSI over the PS3228 at a meaningful premium, which is only worth it for specific work: stripping paint, cleaning equipment and machinery, or heavy industrial grime. It holds resale value in a way CRX-engined units do not, which is a real consideration if the work dries up. For general exterior cleaning it is more than the job needs — and 3,500 PSI around siding, windows, cars and anybody’s feet is genuinely dangerous.
Simpson Clean Machine 3400 — most capability per dollar
3,400 PSI and 2.5 GPM for notably less than the Honda units, with a CRX engine that is the obvious place the money was saved. If your work is seasonal rather than daily, this is the rational purchase: the pressure and flow are there, Simpson’s pump parts and accessories are easy to source, and you are gambling on year four rather than paying to insure against it.
Champion 2800 Low Profile — the transport answer
2,800 PSI at 2.1 GPM in a low-profile frame. It is the least powerful machine here and costs more than higher-PSI competitors, because what you are buying is the form factor: a unit one person can lift into a truck bed and store under a bench. 2,800 PSI is also more usable around a house than 3,400, and 2.1 GPM is the minimum a 15-inch surface cleaner wants — it will run one, just not at full speed.
What to budget beyond the machine
A machine this size without accessories is half a purchase. The short list: a 15-inch surface cleaner (the single biggest time saver), 50 feet of hose so you move the machine less, a turbo nozzle for edges and stubborn patches, an injector because none of these have a soap tank, and pump saver before the first freeze. Expect the accessories to add a real fraction of the machine price.
What I would buy
Daily or near-daily work: PowerShot PS3228. Buy the Honda.
Seasonal work, tight budget: Clean Machine 3400.
You load it into a truck every time: Champion 2800 Low Profile.
Stripping paint or cleaning equipment: PowerShot 3500, and read what a pressure washer can and cannot strip before you count on it.