Patio furniture is a low-pressure, soap-led job: the 40-degree white tip, held about two feet away, with an outdoor cleaner doing the actual work. Almost all the damage people do to outdoor furniture with a pressure washer comes from using a narrow tip up close on plastic or painted metal — it hazes, fuzzes and pits the surface in a way that does not wash off. And the cushions do not go anywhere near the machine.
Pressure and tip by material
| Material | Tip | Distance | Watch out for |
|---|
| Plastic and resin | 40-degree white | 2 ft | Hazing and surface fuzz if you go close |
| Powder-coated aluminum or steel | 40-degree white | 2 ft | Chipping the coating at edges and welds |
| Teak and hardwood | 40-degree white | 2-3 ft | Raising the grain - go along the grain, never across |
| Resin wicker | 40-degree white | 3 ft | Snapping strands; brush instead of blasting |
| Natural wicker or rattan | None | — | Do not pressure wash. Bucket and brush only |
| Glass table tops | 40-degree white | 3 ft | Never spray the edge of tempered glass |
| Cushions and umbrellas | None | — | Soak and brush. Pressure destroys stitching |
Why soap matters more than pressure here
The gray-green film on patio furniture is mostly mildew and algae, and those are living organisms rather than dirt sitting on top. Pressure removes the visible layer and leaves the organism, which is why furniture blasted clean in May looks grubby again by July. An oxygenated outdoor cleaner given five to ten minutes of dwell time actually kills and lifts it, and the rinse then has almost nothing left to do.
That is the whole reason this job runs at low pressure: once the chemistry is doing the work, you do not need force. One bottle of a general outdoor concentrate covers furniture, the patio it sits on and the fence behind it, which is why the all-purpose pick is the sensible buy here rather than something specialized. The product comparison is in best pressure washer detergents, and if your machine has no soap tank, how soap injectors work explains the alternative.
Two rules on application. Do not let cleaner dry on the surface — on a hot day work in shade or in small sections. And rinse plants and nearby grass before and after, because concentrate pooling in a planting bed is the one way this job causes collateral damage.
The materials that need a different approach
Teak and hardwood. Wood fiber tears. Use the widest tip, stay two to three feet back, and move along the grain rather than across it. If the goal is to bring grayed teak back rather than just clean it, the deck-and-fence formulation does that job better than a general cleaner — the reasoning is in best deck cleaners, and the technique transfers directly from how to pressure wash a deck.
Resin wicker. The weave traps mildew in exactly the places a jet cannot reach without cutting a strand. Soap it, let it dwell, then agitate with a brush. The rotary brush attachment on this page is the efficient version of that — it cleans with contact and agitation at low pressure, which is what both wicker and painted wood actually want.
Natural wicker, rattan and bamboo. Do not. These absorb water, swell and then split as they dry, and the frame joints come loose. Bucket, mild cleaner, brush, dry in shade.
Glass table tops. The face is fine at low pressure from three feet. The exposed edge of a tempered glass top is not — a concentrated jet at a chipped edge is how tempered glass fails, and it fails all at once.
What to do about the cushions
This is the most-searched part of this job and the answer is disappointing: a pressure washer is the wrong tool. Pressure drives water deep into foam that then takes a week to dry and grows mildew from the inside, and it chews through seam stitching and piping.
The method that works: check the tag for removable covers and wash those as the label says. For fixed covers, soak the cushion with a diluted outdoor cleaner from a garden sprayer, let it dwell, scrub with a soft brush, then rinse with a plain garden hose — not the machine. Stand them on edge in full sun until completely dry, which usually means longer than you think. Same approach for a patio umbrella: cleaner, soft brush, hose, and dry it open.
Finish the job properly
Check the hardware. Water gets inside hollow frame tubes through bolt holes and feet, and furniture that looks fine can be rusting from the inside. Tip pieces up to drain, and replace any fastener that is already weeping rust.
Do the patio while everything is off it. This is the obvious efficiency and almost nobody plans for it — the furniture is already moved, so clean the surface underneath before you put it back. The method is in how to pressure wash a patio, and if the patio is big enough to be a chore, a surface cleaner is the difference between an hour and an afternoon.
Know what else on the patio is off limits. Screens, light fixtures, outdoor TVs, speaker grilles and anything with a cable — surfaces you should never pressure wash is the full list.